Our Privacy/Cookie Policy contains detailed information about the types of cookies & related technology on our site, and some ways to opt out. By using the site, you agree to the uses of cookies and other technology as outlined in our Policy, and to our Terms of Use.

Close

How to Make a Homemade Water Bottle for Gerbils

i Ryan McVay/Lifesize/Getty Images

Your gerbil can drink water from a dish or a water bottle, but a water bottle is usually the best choice. A dish can get dumped over, filled with bedding by an industrious pet or otherwise cause trouble in the cage. A properly constructed bottle holds the water until it’s needed and releases just what your gerbil asks for. Water bottles are readily available at the pet store or you can make your own.

Step 1

Remove the lid from a clean, dry jar that holds 8 ounces or more. Use a jar with a metal lid for best results. Set the jar aside.

Step 2

Drill through the center of the lid, making a hole the same size as the spout. Since spouts may be different sizes, it’s best to use the smallest bit you think will work and enlarge the hole if necessary.

Step 3

File around the hole to remove any sharp edges. Wipe off any filings with a damp paper towel and dry the lid.

Step 4

Remove the drinking spout from a rubber stopper watering assembly and set the tube aside.

Step 5

Caulk the bottom side of the stopper. Make sure to cover the entire area.

Step 6

Place the caulked side of the rubber stopper against the inside of the lid. Line up the holes on the two parts. Allow the silicone to cure for about 48 hours.

Step 7

Push the drinking spout up into the rubber stopper, starting from the outside and passing it through the lid first.

Step 8

Fill the bottle with water and screw the lid on. The stopper will be on the inside, in the water, and the spout will protrude from the lid.

Step 9

Wrap a loop of wire around the water bottle. If the bottle is large or oddly shaped you may need to use two loops. Bend the wire so that it hangs securely on the gerbil’s cage. Cut off any excess wire.